ELECTRICAL MAINTENANCE PRODUCTS
#R-101 SAFETY SOLVENT
No CFC’s, non-flammable, non-conductive, non-corrosive, ultra high Di-electric strength, high KB value, fast drying “on-line” cleaner & degreaser. Leaves no sticky film, powdery or oily residue. Combination of least toxic, user and workplace friendly solvents. Provides powerful consistent cleaning power.
APPLICATIONS: Insulators, bus-bars, generators, commutators, cables, slip-rings, motor casings, connectors. Prevents short circuiting, leakages, corrosion, fire hazards etc.
#R-102 SAFE CLEAN
Off-line, precision synthetic cleaner cum degreaser designed for use in electrical maintenance. Di-electric and residue less, safe for use on most plastics (Test before use on ABS, acrylic & polystyrenes), Ozone friendly formulation is certified safe for the environment as well as the users. Does not contain any toxic/carcinogenic chemicals.
APPLICATIONS: Cleaning electrical systems, most useful for maintaining motors, circuits breakers, connectors, relay, switches, coils etc. prevents over heating, leakage, arcing, flash-over.
#R-103 ELECTRONIC CLEANER
Fully safe on plastics & metals. Fast cleaning, residue less, low odour formulation, fully Di-electric. Mixed flux removing action. Excellent “offline” cleaning & flushing action with least possibility of equipment damage.
APPLICATIONS: Safe and easy cleaning of sensitive plastics, electrical and electronic components like relays, limit switches, PCB’s, electronic assemblies etc., preventing leakages, short circuiting, corrosion and carbonization.
#R-104 OPTICAL FIBRE CABLE CLEANER
Designed for safely and efficiently cleaning & removing grease, oxides, condensation, dust, dirt, grime & other contaminants from optic fiber cables, connections used in telecommunication. Safe formulation will not damage most plastics(However test on surface). Available with fan & blast type spray heads for versatile cleaning efficiency.
APPLICATIONS: For cleaning optical fiber cables & connectors used in telecommunications & industries.
#R-105 ELECTRICAL BREAKER CLEANER
Electrical Breaker Cleaner is specially designed to reduce maintenance and downtime. It clean electrical breakers and it’s auxiliaries without dismantling components. It’s moderate evaporation provides deep penetration into the deposits and cleans them out.
APPLICATIONS: Electrical Breaker, auxiliaries, electrical rotating machines and it’s windings cleaning etc..
#R-106 AIR DUSTER
Air duster is clean dry gas. The aerosol is filled with the gas in liquid, from operating the aerosol, releases gas and directs the gas flow through a directional spray button. The gas jet can be used to remove the debris from delicate parts and electric components.
APPLICATIONS: Air duster is the pro’s choice for safely removing dust and dirt without contaminating either your computer or the environment. Powerful, effective and ozone safe. It is used hundreds of time by technicians to keep computers and data centers clean.
#R-107 RED INSULTING VANISH
Though flexible air dry insulation and protection coating. Thoroughly
penetrates into windings & coils and seals out dust and moisture.
Designed to be used as a finishing coat over existing impregnating
varnishes to provide class H insulation & protection on unprotected motor
surface(slots, clamps, plates) so as to enhance the life and reliability of
the system as a whole, Also available in Green & Clear colors.
APPLICATIONS: Flexible, conformal, finishing, insulation & protection
on windings & coils; providing ‘in-situ’ insulation, Thermostats, High-
Voltage circuits, commutators ends, Bus-bars, joints & connections etc.
#R-108 ANTI-TRACK
Unique air-dry, Di-electric coating designed to prevent tracking,
arcing and flash overs caused by dust and moisture specifically on
bus bar end-bushing and insulators. Weather proof & non-ageing.
APPLICATIONS: Bus bar ends, bushings, insulators, switch yard
equipment etc.
#R-109 BATTERY TERMINAL COATING
Air tight, water proof and acid resistant, anti-sulfation coating.
Resistant to heat, gasoline, oil & grease will not crack or peel
when correctly applied on undamaged batteries operating in
conditions of medium acidity.
APPLICATIONS: Protecting battery and capable terminals
against leakages, acid sulfation and corrosion. Prevents current
losses and enhances battery life.
#R-110 PCB COATING
Single component acrylic plastic coating; fast drying; conformal; water
clear transparency; good electrical properties; high resistance to burning ,
heat, cold, salts, alkalis, mild acids will not peel, crack or dis-colour,
solder through and removable if required lasting protection against wear,
handling and oxidation, excellent thermal conductivity.
APPLICATIONS: Enhance the working lifespan and reliability of
electronic PCB assemblies. Seals-off dials, gauges, instruments etc.
improves reliability. Di-electric plastic coating of electrical control panels,
junction boxes, motor casings, copper and brass, fixtures protects against
rust and corrosion etc.
#R-111 MOISTURE DISPLACER
Multi application fluid for cleaning, de-watering, preventing
corrosion and improving conductivity in electrical and electronic
systems. Di-electric product restores electrical properties lost due
to moisture, corrosion, dust and carbon. Prevents arcing &
sparking &provides long term protection. Specific gravity heavier
than’1′.
APPLICATIONS: Protecting Connectors, relays, solenoids, control
terminals, capacitors, fuse boxes, switch connectors, switch gears,
electronic PCB’s and equipment’s against moisture and chemical
fumes.
#R-112 CONTACT LUBE
Designed to prevent corrosion & carbon deposition or
precision electrical & electronic equipment. Ultra low
molecular weight, thermally stable & chemical resistant
dry protective film will not pick -up dust & dirt . Reduces
contact resistance, provides durable protection &
enhances working life &reliability.
APPLICATIONS: “Make-Break” systems, connectors,
radio antenna assemblies, H.V breaker assemblies, PCB
connectors, plastic parts, anti-static lubrication.
#R-113 CARBO CLEAN {BULK}
Synthetic heavy duty bulk cleaner cum degreaser. Fast drying & residue less. Excellent cleaning action. Easily strips-off residues of release agents and protective coating.
APPLICATIONS: Cleaning & degreasing of metal moulds, dies, engines, generators, machinery parts…
#R-114 ELECTRO CLEAN{BULK}
Ready to use solvent designed to replace TCE, CFC, CTC and other chlorinated solvents. Odourless, fast evaporating, non-corrosive, residue less. Recommended for cleaning electric motor windings, other electrical & electronic equipments.
APPLICATIONS: Cleaning electric motor windings, cables, electronic equipments & de greasing of mental moulds, dies, machinery parts etc..
